Enabler-G AT Command Set - SE Spezial-Electronic AG

More documents

Recommendations

Info

AT Command Set Reference Version 1.08 3.2.4.3 $IOGPA GPIO Byte Control (continued) Reference N/A Standard Scope Optional Enfora Implementation Scope Full Notes 8 Digits where left bit represents GPIO 1 and right most bit represents GPIO 8. Example: Output format for read command AT$IOGPA? $IOGPA: 11111111 00000000 Configured I/O settings where I/O OK pins are all off. Current I/O settings where I/O pins are all on. GSM0107PB001MAN Page 225 of 370 1.08 – 25 January 2007
AT Command Set Reference Version 1.08 3.2.4.4. $IOADCx Read Analog to Digital Converter Command Function: This command returns the value of the last reading on the Analog to Digital Converter in millivolts. Command Functional Group Enfora Specific Command Format Query N/A Response N/A Write Format N/A Response N/A Read Format N/A Response N/A Execution Format AT$IOADCx Response $IOADCx: OK Parameter Values x 1 Value of ADC1 2 Value of ADC2 decimal value in millivolts Reference N/A Standard Scope Optional Enfora Implementation Scope Full Notes See applicable Integration Guide for pinout definitions. If the modem is not registered or attached, the modem may take up to a minute to update the digital output to reflect a change on the analog input. 0 – 1.75 Vdc range. 1.709 mV resolution. 10 bit. GSM0107PB001MAN Page 226 of 370 1.08 – 25 January 2007
Page 1 and 2:
GSM0107PB001MAN Enfora Enabler-IIG
Page 3 and 4:
AT Command Set Reference Version 1.
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184: AT Command Set Reference Version 1.
Page 233: AT Command Set Reference Version 1.
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
show all

Enabler-G AT Command Set - SE Spezial-Electronic AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?