Enabler-G AT Command Set - SE Spezial-Electronic AG

AT Command Set Reference
Version 1.08
2.4.3.10. AT+CLIR Calling Line Identification Restriction
Command Function This command allows a calling subscriber
to enable or disable the presentation of the
CLI to the called party when originating a
call.
The write command overrides the CLIR
subscription (default is restricted or
allowed) when temporary mode is
provisioned as a default adjustment for all
outgoing calls. This adjustment can be
revoked by using the opposite command.
This command, when used by a subscriber,
without provision of CLIR in permanent
mode the network will act according GSM
02.81 [3].
The read command gives the default
adjustment for all outgoing calls (given in
), and also triggers and interrogation of
the provision status of the CLIR service
(given in ).
Command Functional Supplementary Services
Group
Command Format Query AT+CLIR=?
Response +CLIR: (0, 1, 2)
OK
Write Format AT+CLIR=[]
Response N/A
Read Format AT+CLIR?
Response +CLIR: ,
OK
Execution Format N/A
Response N/A
GSM0107PB001MAN Page 55 of 370 1.08 – 25 January 2007