22.03.2013 Views

Enabler-G AT Command Set - SE Spezial-Electronic AG

Enabler-G AT Command Set - SE Spezial-Electronic AG

Enabler-G AT Command Set - SE Spezial-Electronic AG

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>AT</strong> <strong>Command</strong> <strong>Set</strong> Reference<br />

Version 1.08<br />

2.4.3.5. <strong>AT</strong>+CLCKCFG <strong>Set</strong> Facility Lock Configuration<br />

(continued)<br />

Notes <strong>AT</strong>+CLCKCFG will return “Locked” if facility<br />

is currently locked. Facility must be<br />

unlocked using <strong>AT</strong>+CLCK or <strong>AT</strong>+CPIN if<br />

currently receiving PH-SIM PIN from<br />

<strong>AT</strong>+CPIN? The usage of mode 2 requires<br />

that a value of “”999” be used for the MCC<br />

and “99” be used fro the MNC value. This<br />

acts as a safety for the Delete All mode.<br />

Examples<br />

<strong>AT</strong>+CLCKCFG = 1, “310”, “200” Adds the MCC value 310 and MNC value of<br />

200 to the phones Country/Network code<br />

list.<br />

<strong>AT</strong>+CLCKCFG=2,”999”,”99” Will disable/delete all MCC/MNC entries<br />

from the phones Country/Network code list.<br />

GSM0107PB001MAN Page 44 of 370 1.08 – 25 January 2007

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!