MicroStrategy Mobile Design and Administration Guide

3
Administering MicroStrategy Mobile Mobile Design and Administration Guide
8 Click the trackball/trackwheel and select Close. The Mobile Server Setup
screen closes.
9 Click the trackball/trackwheel and select Save. The new Mobile Server
information is saved.
Once you have configured a Mobile Server, you need to add information
about the projects that contain the reports and documents you are
subscribed to.
To add a project to MicroStrategy Mobile
1 In MicroStrategy Mobile, click the trackball/trackwheel and select
Preferences. The Preferences screen opens.
2 Scroll to the area entitled Mobile Servers Configured.
3 Highlight the MicroStrategy Mobile Server that you want to add a project
for.
4 Click the trackball/trackwheel and select Edit Mobile Server. The Mobile
Server Setup screen opens.
5 Scroll to the area entitled Projects Configured.
6 Click the trackball/trackwheel and select Add Project. The Project Setup
screen opens.
7 Enter the information for each option:
• Project Name: the name of the MicroStrategy project. This field is
case-sensitive.
• Server Name: the Intelligence Server that contains the project, by
DNS name or IP address.
• Server Port: the Intelligence Server port number.
8 To use the default authentication mode and credentials for the project,
under Authentication, select the Use Default check box. To use a
different authentication method, use the following procedure:
a Under Authentication, clear the Use Default check box.
b Scroll to the area entitled Mode.
176 Deploying and configuring the MicroStrategy Mobile application © 2012 MicroStrategy, Inc.