MicroStrategy Mobile Design and Administration Guide

Mobile Design and Administration Guide Administering MicroStrategy Mobile 3
• The administrator registers a Mobile Client Address using the User
Manager. For steps, see To enable real time updates for a user, page 193.
If you delete this address, a warning message is displayed, stating that if you
delete the address, real time updates for the user will be disabled. To restart
real time updates for the user, the address can be registered for the user
again.
To enable real time updates for a user
1 Log in to MicroStrategy Desktop as a user with administrative privileges.
2 Under the project source, expand Administration, then User Manager.
3 Browse to the user that you want to enable real time updates for,
right-click the user and select Edit. The User Editor opens.
4 On the left, expand Deliveries, then select Addresses.
5 On the right side of the User Editor, click New. A new address is created.
6 To rename the address, type a name in the Name field.
7 In the Physical Address field, enter the unique PIN for the user’s mobile
device. For steps to determine this number, see To determine a device’s
PIN, page 193.
8 From the Delivery Type drop-down list, select MobileClient.
9 From the Device drop-down list, select MobileBES.
10 To set this address as the user’s default address, select the Set as default
check box.
11 Click Save. The address is saved.
12 Click OK. The User Editor closes.
To determine a device’s PIN
The
third-party products discussed below are manufactured by
vendors independent of MicroStrategy, and the information provided
© 2012 MicroStrategy, Inc. Enabling real time updates for BlackBerry 193