MicroStrategy Mobile Design and Administration Guide

1
Designing Reports and Documents for iOS and Android Devices Mobile Design and Administration Guide
End Goal
Use a stepper to
increment or
decrement a
numeric value
Select a numeric
value from a
wheel
Filter data based
on a user’s
current location
Type text to
answer a prompt
Scan or type an
item’s barcode
Type a large
number to answer
a prompt
Prompt Type and
Display Style
Prompt type:
Numeric
Display style:
Stepper
Prompt type:
Numeric
Display style:
Wheel
Prompt type:
Numeric
Display style:
Geo Location
Prompt type:
Text
Display style:
Textbox
Prompt type:
Text
Display style:
Barcode Reader
Prompt type: Big
Decimal
Display style:
Textbox
Setup Recommendations and Requirements
Minimum value: Specify the lowest value that is displayed in
the prompt.
Maximum value: Specify the highest value that is displayed in
the prompt.
Interval: Specify the interval used to increment or decrement
values in the stepper. For example, if the stepper’s minimum
value is set to 100, and the interval is 10, users can increment
the stepper value to 100, 110, 120, and so on.
Minimum value: Specify the lowest value that is displayed in
the prompt.
Maximum value: Specify the highest value displayed in the
prompt.
Interval: Specify the interval displayed between each value on
the wheel. For example, an interval of 30 allows users to
specify values in increments of 30.
Mobile preferences: Select the Latitude or Longitude option
to filter data based on the current latitude or longitude.
Note: For Geo Location prompts, you must create one prompt
for the longitude, and one for the latitude.
For a detailed description of the Geo Location prompt, see
Prompting users for their location: Geo Location prompts,
page 34.
Minimum number of characters: Specify the minimum
required length of the prompt answer.
Maximum number of characters: Specify the maximum
allowable length of the prompt answer.
Minimum number of characters: Specify the minimum
required length of the barcode.
Maximum number of characters: Specify the maximum
allowable length of the barcode.
For a detailed description of the Barcode Reader prompt, see
Creating Barcode Reader prompts, page 35.
Minimum value: Specify the lowest value that can be used to
answer the prompt.
Maximum value: Specify the highest value that can be used to
answer the prompt.
For examples of each prompt display style, see Allowing users to filter
data: prompts, page 25.
30 Allowing users to filter data: prompts © 2012 MicroStrategy, Inc.