MicroStrategy Mobile Design and Administration Guide

Mobile Design and Administration Guide Designing Reports and Documents for iOS and Android Devices 1
End Goal
Select a date from
a calendar
Select a date and/
or time from a
wheel
Type a numeric
value to answer a
prompt
Use a switch to
choose between
two numeric
values
Select a numeric
value on a
horizontal slider
To specify the layout and display style of the prompt
8 Click the Style tab.
9 From the Display style drop-down list, specify a presentation style, such
as Textbox, for the prompt. This is how the prompt is displayed to the
user.
10 Depending on your requirements, choose the appropriate display style
and options by referring to the following table:
Prompt Type and
Display Style
Prompt type:
Date & Time
Display style:
Textbox
Prompt type:
Date & Time
Display style:
Textbox
Prompt type:
Numeric
Display style:
Textbox
Prompt type:
Numeric
Display style:
Switch
Prompt type:
Numeric
Display style:
Slider
Setup Recommendations and Requirements
Minimum value: Specify the earliest date that can be used to
answer the prompt.
Maximum value: Specify the latest date that can be used to
answer the prompt.f
Minimum value: Specify the earliest date and time that can be
used to answer the prompt.
Maximum value: Specify the latest date and time that can be
used to answer the prompt.
Allow user to select time: Specify whether or not the user can
select a time as well as a date to answer the prompt.
Interval (minutes): Specify the interval displayed between each
value on the wheel. For example, an interval of 30 allows users
to select times in 30-minute intervals, such as 9:30 A.M., 10:00
A.M., 10:30 A.M., and so on.
Minimum value: Specify the lowest value that can be used to
answer the prompt.
Maximum value: Specify the highest value that can be used to
answer the prompt.
On value: Specify the numeric value used when the switch is
set to its On position. The default is 1.
Off value: Specify the numeric value used when the switch is
set to its Off position. The default is 0.
Minimum value (required): Specify the lowest selectable value
in the slider.
Maximum value (required): Specify the highest selectable
value in the slider.
Interval: Specify the interval displayed between each value on
the slider. For example, an interval of 10 allows users to specify
values in increments of 10, such as 10, 20, 30, and so on.
© 2012 MicroStrategy, Inc. Allowing users to filter data: prompts 29