Operating Instructions HDD Recorder DMR-HW120 - CCL Computers

To confirm and edit a timer
programme
1 Press [PROG/CHECK].
e.g.,
Timer Recording Remain HDD 30:30
SUN 01/01/2012 8:05
Channel Name Schedule Space
SAT 08/01
11:00 - 11:45
OK
SAT 08/01
10:00 - 11:50
SAT 08/01
11:30 - 1:00
SAT 01/01
8:00 - 10:45
OK
New Timer Programme
OK
RETURN
Total 3/32
Turn
Timer Off
Delete Info
Resolve overlap
2 Select the programme, then perform the
operations.
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
( 33)
3 Press [OK].
To show programme information
Press [STATUS ].
To exit the timer recording list
Press [EXIT ].
Page Up
Page Down
• “No Data” is displayed on a series recording item if there
will be no episode of the series for the next 8 days. We
recommend you delete the “No Data” item after you confirm
the last episode of the series is recorded.
Screen icons
F
Recording
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[ Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
• Programme overlapping can be resolved
with repeat programme if available.
Select the programme, then press the
green button.
( 31, If “Overlapped Timer Recording”
screen appears)
• This function is not available for the timer
programmes that were set manually.
Guide
S/P
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set ( 33).
Guide Link ( 32)
Split Programme ( 32)
Series Timer Recording ( 32)
OK Displayed if the recording can fit in the
remaining space
Daily or weekly timer programme is set.
(Date)
! It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. ( 91)
- programmes are deactivated, etc.
VQT4E91 35