Digital Video Recorder, H.264 Models: DMR-5008/500 (8-Channel ...
Digital Video Recorder, H.264 Models: DMR-5008/500 (8-Channel ...
Digital Video Recorder, H.264 Models: DMR-5008/500 (8-Channel ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
14<br />
User’s Manual<br />
System Setup<br />
General<br />
Highlight General and press the button, and the General screen appears.<br />
Figure 8 : System – General setup screen.<br />
In the General screen, you can name the site location, assign a System ID number, select the language the screens are<br />
displayed in, display software version number, upgrade the software, show the System Log, display recorded time data,<br />
and clear all data.<br />
Highlight the Site box and press the button. A virtual keyboard appears that you can use to enter a Site Name. Once<br />
you have entered your title, highlight OK and press the button.<br />
Highlight the box beside System ID and press the button. Change the number by highlighting it and using the Up<br />
and Down arrow buttons to increase and decrease the number from 0 to 99.<br />
NOTE: The System ID number is used to identify the unit when it is connected with other DVRs through the<br />
RS485 port. You cannot use the same ID number for two or more DVRs that are in the same RS485<br />
network. It is possible to have multiple DVRs with System ID 0 that are in the same area as long as they<br />
are not part of an RS485 network. If this is the case, all will be controlled at the same time when using<br />
the infrared remote control.<br />
Highlight the box beside Language and press button. A drop-down menu displays the available languages. Highlight<br />
the desired language and press the button.<br />
The box beside Version displays the software version of the DVR.<br />
To upgrade the software, connect a USB device containing the upgrade package file to the DVR. Highlight Upgrade…<br />
and press the button. The Upgrade screen appears. The screen displays the upgrade package file names that are<br />
available. The “.rui” indicates that the file is for software upgrades and “.ofi” indicates that the file is for optical drive<br />
firmware upgrades.<br />
Select the desired file and press the button. Highlighting the Install button and pressing the button will install<br />
the selected software package. Highlighting the Cancel button and pressing the button will close the window without<br />
upgrading the software. If the upgrade package file is not installed on the DVR properly, you will get an error message.<br />
The system restarts automatically after completing the upgrade.