magicolor 1650EN User's Guide - Konica Minolta

More documents

Recommendations

Info

12 Press in the magenta toner cartridge until it locks into place. 13 Close the front cover. Cleaning the Printer 7-17
7-18 Cleaning the Media Feed Rollers for Tray 2 Be sure to remove the duplex option before cleaning the media feed rollers for Tray 2. 1 If the duplex option is installed, remove it. 2 Remove the dust cover from Tray 1. Close Tray 1 and the output tray. 3 Lift the printer off of Tray 2 and temporarily place it on a sturdy flat surface. 4 Clean the media feed rollers by wiping them with a soft, dry cloth. Cleaning the Printer
Page 1 and 2:
magicolor 1650EN User’s Guide A03
Page 3 and 4:
x-2 SOFTWARE LICENSE AGREEMENT This
Page 5 and 6:
4. DISCLAIMER OF WARRANTY Adobe lic
Page 7 and 8:
5. All company names and product na
Page 9 and 10:
x-8 this License Agreement will rem
Page 11 and 12:
2 Using the Printer Driver ........
Page 13 and 14:
x-12 Cleaning the Print Head Window
Page 15 and 16:
Getting Acquainted with Your Printe
Page 17 and 18:
1-4 Printer Parts 11 The following
Page 19 and 20:
1-6 Front View with Options (when T
Page 21 and 22:
Printer Driver CD/DVD 1-8 PostScrip
Page 23 and 24:
1-10 Documentation Documentation Us
Page 25 and 26:
1-12 System Requirements
Page 27 and 28:
Selecting Driver Options/Defaults (
Page 29 and 30:
Uninstalling the Printer Driver (fo
Page 31 and 32:
Using the Postscript and PCL Printe
Page 33 and 34:
2-8 Basic Tab The Basic Tab allows
Page 35 and 36:
2-10 Select that the white backgro
Page 37 and 38:
Working with the Status Monitor 3-2
Page 39 and 40:
3-4 Closing the Status Monitor
Page 41 and 42:
About the Control Panel 4-2 The con
Page 43 and 44:
4-4 Toner Supply Indicators The ind
Page 45 and 46:
4-6 MAIN MENU PRINT MENU With this
Page 47 and 48:
4-8 PAPER MENU With this menu, the
Page 49 and 50:
4-10 CUSTOM SIZE WIDTH (xx) LENGTH
Page 51 and 52:
4-12 PAGE RECOV- ERY Settings ON/OF
Page 53 and 54:
4-14 All factory default values ar
Page 55 and 56:
4-16 DUPLEX SPEED Settings AUTOMATI
Page 57 and 58:
4-18 USB IPX/SPX ETHERNET SPEED DIS
Page 59 and 60:
4-20 IP SER- VICES ENABLE AUTO IP S
Page 61 and 62:
4-22 SYSTEM DEFAULT With this menu,
Page 63 and 64:
4-24 EMULA- TIONS DEFAULT Settings
Page 65 and 66:
4-26 FORMAT ERASE FLASH RESTORE /SA
Page 67 and 68:
4-28 Configuration Menu Overview
Page 69 and 70:
Print Media Specifications Media Me
Page 71 and 72:
5-4 Keep media between 15% and 85%
Page 73 and 74:
5-6 Labels A sheet of labels consis
Page 75 and 76:
5-8 Use postcards that are Approve
Page 77 and 78:
Loading Media How do I load media?
Page 79 and 80:
5-12 4 Slide the media guides again
Page 81 and 82: 5-14 4 Load the envelopes flap side
Page 83 and 84: 5-16 Loading Labels/Postcard/Thick
Page 85 and 86: 5-18 Tray 2 Only Letter/A4 plain pa
Page 87 and 88: 5-20 7 Reinsert Tray 2 into the pri
Page 89 and 90: 5-22 In addition, if “N-up” has
Page 91 and 92: 5-24 Media Storage
Page 93 and 94: Replacing Consumables 6-2 Note Fail
Page 95 and 96: 6-4 Keep toner cartridges: In thei
Page 97 and 98: 6-6 Press Key Until Display Reads
Page 99 and 100: 6-8 Note Do not touch the contact i
Page 101 and 102: 6-10 Note Do not touch the contact
Page 103 and 104: 6-12 Removing All Toner Cartridges
Page 105 and 106: 6-14 3 Pull down the handle on the
Page 107 and 108: 6-16 Replacing the Imaging Cartridg
Page 109 and 110: 6-18 5 Carefully close the top cove
Page 111 and 112: 6-20 3 Push the blue handles back a
Page 113 and 114: 6-22 7 Remove the fuser separator m
Page 115 and 116: 6-24 9 After the fuser unit is firm
Page 117 and 118: Maintaining the Printer 7-2 CAUTION
Page 119 and 120: Cleaning the Printer 7-4 CAUTION Be
Page 121 and 122: 7-6 Note Do not touch the PC drum a
Page 123 and 124: 7-8 4 Slowly insert the imaging car
Page 125 and 126: 7-10 To exit P/H CLEAN UP mode, pr
Page 127 and 128: 7-12 6 Grab the handle and lift it
Page 129 and 130: 7-14 Note Decreased print quality m
Page 131: 7-16 11 Align the shaft on each end
Page 135 and 136: 7-20 Cleaning the Media Feed Roller
Page 137 and 138: 7-22 Cleaning the Duplex Feed Rolle
Page 139 and 140: Introduction 8-2 This chapter provi
Page 141 and 142: Preventing Media Misfeeds 8-4 Make
Page 143 and 144: 8-6 Media Misfeed Messages and Clea
Page 145 and 146: 8-8 Note Do not touch the PC drum a
Page 147 and 148: 8-10 4 Remove any misfed media. If
Page 149 and 150: 8-12 5 Return the fuser separator l
Page 151 and 152: 8-14 Clearing a Media Misfeed From
Page 153 and 154: 8-16 8 Reinsert Tray 2. 9 Open and
Page 155 and 156: 8-18 3 Close the duplex cover. Clea
Page 157 and 158: 8-20 Symptom Cause Solution Media i
Page 159 and 160: 8-22 Symptom Cause Solution Printin
Page 161 and 162: 8-24 Symptom Cause Solution Media i
Page 163 and 164: 8-26 Symptom Cause Solution Image i
Page 165 and 166: 8-28 Symptom Cause Solution There a
Page 167 and 168: 8-30 Symptom Cause Solution Colors
Page 169 and 170: 8-32 This message... means... do th
Page 171 and 172: 8-34 Error Messages (Operator Call)
Page 173 and 174: 8-36 Service Messages These message
Page 175 and 176: Introduction 9-2 Note Use of access
Page 177 and 178: 9-4 2 Remove the dust cover from Tr
Page 179 and 180: Duplex Option 9-6 Duplex (Double Si
Page 181 and 182: 9-8 Installing the Duplex Option T
Page 183 and 184:
9-10 6 Reconnect all interface cabl
Page 185 and 186:
Technical Specifications A-2 Printe
Page 187 and 188:
A-4 Acoustic Noise Printing: 50 dB
Page 189 and 190:
Our Concern for Environmental Prote
Page 191:
Interior ..........................
show all

magicolor 1650EN User's Guide - Konica Minolta

Create successful ePaper yourself

Delete template?

Save as template?