magicolor 1650EN User's Guide - Konica Minolta

Solving Other Problems
To order KONICA MINOLTA consumables, go to www.q-shop.com.
Symptom Cause Solution
Printer
power is not
on.
The control
panel displays
X
TONER
LOW much
sooner than
expected.
You can’t
print the configuration
page.
The power cord is not
correctly plugged into
the outlet.
Something is wrong
with the outlet connected
to the printer.
The power switch is
not correctly turned
on (I position).
The printer is connected
to an outlet
with a voltage or frequency
that does not
match the printer
specifications.
One of the toner cartridges
may be defective.
You printed with
heavy toner coverage.
Turn off the printer, confirm that the
power cord is correctly plugged into the
outlet, and then turn on the printer.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
Turn the power switch off (O position),
then turn it back to the on (I position).
Use a power source with the specifications
listed in appendix A, “Technical
Specifications”.
Remove the toner cartridges and check
each for damage. If one or more is
damaged, replace it.
See specifications in appendix A,
“Technical Specifications”.
The tray is empty. Check that at least Tray 1 is loaded
with media, in place, and secure.
There is a media
misfeed.
Clear the media misfeed.
Solving Other Problems 8-21