magicolor 1650EN User's Guide - Konica Minolta

5-22
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is performed.
The following Order settings are available when “Booklet” is selected.
1 Load plain paper into the tray.
2 From the printer driver, specify the layout for duplex printing.
3 Click OK.
With autoduplexing, the back side is printed first, and then the front
side is printed.
Output Tray
1
1
3
2
2
1
3
3 1
If “Left Binding” is selected, the pages can be folded as a
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a
right-bound booklet.
All printed media is output to the face-down output tray on top of the printer.
This tray has a capacity of approximately 100 sheets (A4/Letter) of 80 g/m 2
(21 lb) paper.
If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
Output Tray