magicolor 1650EN User's Guide - Konica Minolta

AUTO Settings ON/OFF
CONTINUE
If OFF is selected, an error occurs if the size of
paper being printed on is different from the size of
paper specified in the printer driver.
If ON is selected, no error occurs if the size of paper
being printed on is different from the size of paper
specified in the printer driver.
TRAY Settings YES/NO
CHAINING If YES is selected and the specified paper tray runs
out of paper during printing, a paper tray loaded with
paper of the same size is automatically selected so
printing can continue.
If NO is selected and the specified paper tray runs
out of paper, printing stops.
MAP MODE Settings ON/OFF
LOGI-
CAL
TRAY
0-9
Select whether or not the Tray Mapping
function is used.
Settings PHYSICAL TRAY 1/
PHYSICAL TRAY 2
Specify whether jobs received from
another manufacturer’s printer driver are
printed using Tray 1 or Tray 2.
PHYSICAL TRAY 2 is the default only
for LOGICAL TRAY 2. The default for
all other logical trays is PHYSICAL
TRAY 1.
DUPLEX Settings OFF/SHORTEDGE/LONGEDGE
If LONGEDGE is selected, the pages will be printed on both sides
of the paper for long-edge binding.
If SHORTEDGE is selected, the pages will be printed on both
sides of the paper for short-edge binding.
ORIEN- Settings PORTRAIT/LANDSCAPE
TATION Specify the orientation of the media.
Configuration Menu Overview 4-11