magicolor 1650EN User's Guide - Konica Minolta

ETHER-
NET
All factory default values are shown in bold.
TCP/IP ENABLE Settings YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IPV4 DHCP/ Settings YES/NO
BOOTP Select whether or not the IP
address is automatically
acquired.
IPV4
ADDRESS
DEFAULT
ROUTER
SUBNET
MASK
If YES is selected, the IP address
is automatically acquired.
If NO is selected, the IP address
is not automatically acquired.
Settings 192.168.001.002
Set the IPv4 address for this
printer on the network.
Use the +, ,, *, and ) keys to
specify the value.
If the IP address is manually
specified, DHCP/BOOTP is
automatically set to NO.
Settings 000.000.000.000
Specify the IPv4 address of the
router if one is on the network.
Use the +, ,, *, and ) keys to
specify the value.
Settings 000.000.000.000
Specify the subnet mask for the
network.
Use the +, ,, *, and ) keys to
specify the value.
Configuration Menu Overview 4-19