Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MOSAIQ <strong>Dosimetrist</strong>/<strong>Physicist</strong> <strong>Training</strong> <strong>Guide</strong> Module I<br />
Notes 3. Type Cerro in the Block field.<br />
Specifies the type of block necessary for treatment.<br />
4. Type None in the Bolus field.<br />
Specifies no bolus.<br />
5. Change geometric or other settings if necessary.<br />
Your entries should look similar to those shown in Figure 76.<br />
Figure 76: Treatment Field Definition Completed<br />
Applying a Tolerance Table<br />
Before you save the treatment field definition, you must apply a tolerance table to the<br />
field. Tolerance tables are configured in the System Utilities. In this exercise, you will<br />
apply a tolerance table.<br />
1. In the Treatment Field Definition dialog box, click adjacent to the Tolerance<br />
field.<br />
Opens the Tolerance Table list, shown in Figure 77.<br />
Figure 77: Tolerance Table List<br />
96 Copyright 2009, IMPAC Medical Systems<br />
LTGRAD0005A/2.0/26-Feb-2009