Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology

MOSAIQ Dosimetrist/Physicist Training Guide Module I
Notes
5. Click .
Figure 81: Positional Limit Exceeded Message Box
Applies the new parameters. If your machine can accept the values for the out-ofbound
parameters, you can change your machine characterization and not use the
Apply Limits option.
6. Save your changes.
Copying Treatment Fields
You can copy the second treatment field from the second simulation field, the same as
you did with the first treatment field. If you have added all the MU/dose parameters
for the first treatment field, you can copy that treatment field, then change only those
parameters necessary for the second treatment field. In this exercise, you will copy
treatment fields.
1. In the Diagnoses and Interventions window, click the 1 - Lt. AP Lung treatment
field, then click .
Specifies the treatment field to copy, then opens the Confirm Field Copy message
box.
2. Click .
Opens the Treatment Field Definition dialog box with the settings from the
copied treatment field.
3. Type 2 in the first Field text box, then press TAB.
Specifies that this is the second treatment field.
4. Type Lt. PA Lung in the second Field text box.
Specifies that this is the posterior treatment field.
5. Right-click or press F4.
Opens the Treatment Field Definition options menu.
6. Click Flip.
Opens the Flip Confirmation message box, shown in Figure 82.
100 Copyright 2009, IMPAC Medical Systems
LTGRAD0005A/2.0/26-Feb-2009