Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology

More documents

Recommendations

Info

MOSAIQ Dosimetrist/Physicist Training Guide Module I Notes 4. Click . Prints the barcode label for the selected field. Once you print the barcode labels, you must attach the applicable label to the applicable block/accessory. When you treat a field, swipe the block/accessory with a barcode wand before beam on. This makes sure that you use the correct block/accessory for the field. Approving Treatment Fields When you have set up the treatment fields how you want them, you can approve the treatment fields before you treat the patient. In fact, your facility can require you to approve a treatment field before you can treat a patient. When you approve a field, you cannot remove it, but you can make changes to the field. If you change an approved field, the status of the field automatically changes to Unapproved. You must have the correct approval privileges to approve treatment fields. In this exercise, you will approve the treatment field you manually added in this lesson. 1. In the Diagnoses and Interventions window, double-click the 03 LAO Lung treatment field. Opens the Treatment Field Definition dialog box. 2. Right-click in the Treatment Field Definition dialog box or press F4. Opens the Treatment Field Definition Options menu. 3. Click Approve…. Opens the Approve Treatment Field Definition dialog box, shown in Figure 92. Figure 92: Approve Treatment Field Definition Dialog Box You can also press CTRL+A to open the Approve Treatment Field Definition dialog box. 4. Type your Password, then press ENTER. Adds your user initials and the approval date in the Approved field, shown in Figure 93. 110 Copyright 2009, IMPAC Medical Systems LTGRAD0005A/2.0/26-Feb-2009
Notes Lesson 3: Adding Simulation and Treatment Fields Copyright 2009, IMPAC Medical Systems 111 LTGRAD0005A/2.0/26-Feb-2009 You can also approve treatment fields when you first add them. Figure 93: Treatment Field Definition Dialog Box – Approved Treatment Field 5. Click . Approval signature and date. Saves the approved treatment field information, then closes the Treatment Field Definition dialog box. The approval appears in the Status column of the Diagnoses and Interventions window as shown in Figure 94. Figure 94: Diagnoses and Interventions Dialog Box with Approved Field
Page 1:
MOSAIQ Dosimetrist/Physicist Traini
Page 4 and 5:
PUBLISHED BY: IMPAC Medical Systems
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69: MOSAIQ Dosimetrist/Physicist Traini
Page 140 and 141: Check tasks covered Can you do the
show all

Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?