Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MOSAIQ <strong>Dosimetrist</strong>/<strong>Physicist</strong> <strong>Training</strong> <strong>Guide</strong> Module I<br />
Notes<br />
Opens the Record Status dialog box, which lets you change<br />
the status of a treatment session.<br />
Opening the Dosimetry Configuration Dialog<br />
Box<br />
In the Dosimetry Configuration dialog box, you can configure the dose unit for all<br />
MOSAIQ dialog boxes. You can also configure the defaults for the minimum time<br />
between treatment sessions and the dose required to count a partial treatment as a<br />
fraction. In this exercise, you will open the Dosimetry Configuration dialog box.<br />
1. Click File | System Utilities | Department Setup…, then click .<br />
Opens the Clinical (RO) tab of the Department Setup dialog box, shown in<br />
Figure 16.<br />
Figure 16: Department Setup Dialog Box – Clinical (RO) Tab<br />
2. Click .<br />
Opens the Dosimetry Configuration dialog box, shown in Figure 17.<br />
32 Copyright 2009, IMPAC Medical Systems<br />
LTGRAD0005A/2.0/26-Feb-2009
Change language