Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology

Lesson 2: Adding Diagnoses, Care Plans, and Prescriptions
Copyright 2009, IMPAC Medical Systems 73
LTGRAD0005A/2.0/26-Feb-2009
Notes Affirming a Diagnosis
1. In the Diagnosis and Staging window, click .
2. Click to save the diagnosis and close the Diagnosis and Staging
window.
3. Click to close the Diagnosis and Problem List dialog box.
Assigning Care Plans
1. In the Diagnoses and Interventions window, click in the Add group to
open the Patient Care Plan dialog box.
2. Click adjacent to the Care Plan field to open the Care Plans window.
3. Click .
4. In the Patient Care Plan dialog box, click the treatment intent from the Intent field,
such as Curative (primary).
5. In the Treatment Modality group, select the treatment modality, such as External
Beam field.
6. Click to add the course of treatment to the patient chart.
Adding Prescriptions
1. In the Diagnoses and Interventions window, click the course of treatment, then
click in the Add group.
2. In the Radiation Prescriptions dialog box, click to open the Radiation
Prescriptions dialog box in edit mode.
3. Type the name of the prescription site in the Rx Site field.
4. Click the technique, such as AP/PA, from the Technique field.
5. Click the treatment modality, such as x06, from the Modality field.
6. Click adjacent to the Dose Spec field, then select the dose specification name,
such as Isodose.
7. Type the isodose percentage in the second field (text field to the right of the Dose
Spec field), then select % in the adjacent field.
8. Type the total dose in the Rx Dose field.
9. Type the dose to deliver for each treatment fraction in the Fractional Dose field.
10. Click adjacent to the Fractionation Pattern field to open the Wave Setup Form
dialog box.