Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology

More documents

Recommendations

Info

MOSAIQ Dosimetrist/Physicist Training Guide Module I Notes Use the Field Setup text box in the Treatment Field Definition dialog box to type your note text. If your note is an alert, click the Display Field Setup First when Treating this Field checkbox. When this box is selected, the Field Setup view automatically appears when the therapist selects the field for treatment. If it is not an alert, the default view appears. 2. Click in the Field Setup text box, then type SUPINE, AQUAPLAST, SPONGE UNDER KNEES. Specifies the note text. 3. Click . Press ENTER in the Setup Note field to move the insertion point to a new line. This does NOT save the note and close the Treatment Field Definition dialog box. Saves the treatment field, then closes the Treatment Field Definition dialog box. The new treatment field appears in the Diagnoses and Interventions window as shown in Figure 79. Figure 79: Diagnoses and Interventions Window with New Treatment Field 98 Copyright 2009, IMPAC Medical Systems LTGRAD0005A/2.0/26-Feb-2009
Lesson 3: Adding Simulation and Treatment Fields Copyright 2009, IMPAC Medical Systems 99 LTGRAD0005A/2.0/26-Feb-2009 Notes Using the Apply Limits Option The Apply Limits option lets you correct out-of-bounds parameters for the Gantry angle, Collimator angle, MLC, Field size X/Y, and Jaws X1, X2, Y1, and Y2. If one or more of these field parameters exceeds the machine limits as defined in the Machine Characterization in MOSAIQ, the Positional Limits Exceeded message opens. In this exercise, you will apply the Apply Limits option. The Positional Limit Exceeded message shows different messages based on the task you are doing when you exceed the positional limits. If you use the Apply Limits option, make sure that your clinical staff verifies all changes. 1. In the Diagnoses and Interventions window, double-click 1 - Lt. AP Lung. Opens the Treatment Field Definition dialog box for the selected treatment field. 2. Change one or two geometric settings so that they are out of bounds. Makes sure that the message box appears. 3. Right-click in the Treatment Field Definition dialog box or press F4. Opens the Treatment Field Definition Options menu, shown in Figure 80. 4. Click Apply Limits. Figure 80: Treatment Field Definition Options Menu Closes the Treatment Field Definition Options menu and opens the Positional Limit Exceeded message box, shown in Figure 81.
Page 1:
MOSAIQ Dosimetrist/Physicist Traini
Page 4 and 5:
PUBLISHED BY: IMPAC Medical Systems
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57: MOSAIQ Dosimetrist/Physicist Traini
Page 140 and 141: Check tasks covered Can you do the
show all

Dosimetrist/Physicist Training Guide - UCSF Radiation Oncology

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?