CommandCenter Secure Gateway - Admin Guide - Version ... - Raritan

Chapter 12: Remote Authentication
5. Type the password for the user account you want to use to query the
AD server in the Password and Confirm Password fields. Maximum
length is 32 characters.
6. Click Test Connection to test the connection to the AD server using
the given parameters. You should receive a confirmation of a
successful connection. If you do not see a confirmation, review the
settings carefully for errors and try again.
7. Click Next to proceed. The Advanced tab opens.
AD Advanced Settings
To configure advanced AD settings:
1. Click the Advanced tab.
2. Type the port number on which the AD server is listening. The default
port is 389. If you are using secure connections for LDAP, you may
need to change this port. The standard port for secure LDAP
connections is 636.
3. Select the Secure Connection for LDAP checkbox if you want to use a
secure channel for the connection. If checked, CC-SG uses LDAP
over SSL to connect to AD. This option may not be supported by your
AD configuration.
4. Specify a Base DN (directory level/entry) under which the
authentication search query will be executed. CC-SG can do a
recursive search downward from this Base DN.
Example
dc=raritan,dc=com
cn=Administrators,cn=Users,dc=raritan,dc
=com
Description
The search query for
the user entry will be
made over the whole
directory structure.
The search query for
the user entry will be
performed only in the
Administrators
sub-directory (entry).
5. Type a user's attributes in the Filter field so the search query will be
restricted to only those entries that meet this criterion. The default filter
is objectclass=user, which means that only entries of the type user are
searched.
6. Specify the way in which the search query will be performed for the
user entry.
138