CommandCenter Secure Gateway - Admin Guide - Version ... - Raritan

Chapter 6: Devices, Device Groups, and Ports
7. In the Location and Contacts tab, select the checkbox for the
information you want to copy:
• Select the Copy Location Information checkbox to copy the
location information displayed in the Location section.
• Select the Copy Contact Information checkbox to copy the contact
information displayed in the Contacts section.
• You may change, add or delete any data in these tabs. The
modified data will be copied to multiple devices in the Selected
Devices list as well as the current device displayed in the Device
Name field. Optional.
8. Click OK to bulk copy. A message appears when the selected
information has been copied.
Upgrading a Device
You can upgrade a device when a new versions of device firmware is
available.
Important: Check the Compatibility Matrix to make sure the new
device firmware version is compatible with your CC-SG firmware
version. If you need to upgrade both CC-SG and a device or group of
devices, perform the CC-SG upgrade first, and then perform the
device upgrade.
To upgrade a device:
1. Click the Devices tab and select a device from the Devices tree.
2. Choose Devices > Device Manager > Upgrade Device.
3. Firmware Name: Select the appropriate firmware from the list. Raritan
or your reseller will provide this information.
4. Click OK to upgrade the device.
• Upgrading SX and KX devices takes about 20 minutes.
• If the firmware version of the device is not compatible with CC-SG,
a message appears. Click Yes to upgrade the device. Click No to
cancel the upgrade.
5. A message appears. Click Yes to restart the device. A message
appears when the device has been upgraded.
6. To ensure that your browser loads all upgraded files, close your
browser window, and then login to CC-SG in a new browser window.
48