CommandCenter Secure Gateway - Admin Guide - Version ... - Raritan

Chapter 15: Advanced Administration
Reschedule a Task
The Save As function in Task Manager enables you to reschedule a
completed task that you want to run again. This is also a convenient way to
create a new task that is similar to a completed task.
To reschedule a task:
1. Choose Administration > Tasks.
2. In the Task Manager page, select the task you want to reschedule.
Use the filtering criteria to search for the task.
3. Click Save As.
4. In the Save As Task window that opens, the tabs are populated with
the information from the previously configured task.
5. Change the task specifications as needed. See Schedule a Task (on
page 216) and Schedule a Device Firmware Upgrade (on page 218)
for tab descriptions.
6. Click OK to save your changes.
CommandCenter NOC
Schedule a Task that is Similar to Another Task
You can use a previously configured task as a "template" to schedule a
new task with similar specifications.
To schedule a tast that is similar to another task:
• See Reschedule a Task (on page 220).
Delete a Task
You can delete a task to remove it from the Task Manager. You cannot
delete a task that is currently running.
To delete a task:
• Select the task, then click Delete.
Adding a CommandCenter NOC (CC-NOC) to your setup will expand your
target management capabilities by providing monitoring, reporting, and
alert services for your serial and KVM target systems. See Raritan's
CommandCenter NOC documentation for details on installing and
operating CC-NOC.
To create a valid connection between the CC-SG and the CC-NOC, you
should synchronize the time settings on each. CC-NOC and CC-SG are
required to be configured if you want to use an NTP server.
220