CommandCenter Secure Gateway - Admin Guide - Version ... - Raritan

Chapter 6: Devices, Device Groups, and Ports
2. Choose Devices > Device Manager > Resume Management. The
device icon in the Device Tree will indicate the device's active state.
Device Power Manager
Use the Device Power Manager to view the status of a PowerStrip device
(including voltage, current, and temperature) and to manage all power
outlets on the PowerStrip device. Device Power Manager provides a
PowerStrip-centric view of its outlets.
Before using the Device Power Manager, a physical connection must be
made between a PowerStrip and a Dominion SX or Dominion KSX unit.
When you add the PowerStrip device, you must define which Raritan
device is providing the connection. This will associate it with the SX serial
port or the KSX dedicated power port that is providing management of the
PowerStrip.
To view the device power manager:
1. In the Devices tab, select a PowerStrip device.
2. Choose Devices > Device Power Manager.
3. The outlets are listed in the Outlets Status panel. You may have to
scroll to view all outlets.
• Click the On or Off radio buttons for each outlet to power ON or
power OFF the outlet.
• Click Recycle to restart the device connected to the outlet.
Launching a Device's Administrative Page
If available for the device selected, the Launch Admin command provides
access to the device's administrator interface.
To launch a device's administrative page:
1. Click the Devices tab and select the device whose administrator
interface you want to launch.
2. Choose Devices > Device Manager > Launch Admin. The
administrator interface for the selected device appears.
55