CommandCenter Secure Gateway - Admin Guide - Version ... - Raritan

Chapter 12: Remote Authentication
Synchronize All User Groups with AD
You should synchronize all user groups if you have made a change to a
user group, such as moving a user group from one AD module to another.
(You can also change the AD association of a user group manually, in the
User Group Profile's Active Directory Associations tab.)
If you have made changes to users or domain controllers, you should
synchronize all AD modules. See Synchronize All AD Modules (on page
144).
When you synchronize AD user groups, CC-SG retrieves the groups for
the selected AD module, compares their names with the user groups that
have already been imported from AD, and identifies the matches. CC-SG
will present the matches and allow you to select which groups in AD you
want to associate with CC-SG. This does not update user access
information in CC-SG. Synchronizing AD User Groups only maps the
group names from AD to CC-SG.
To synchronize all user groups with AD:
1. Choose Administration > Security.
2. Click the Authentication tab. All configured Authorization and
Authentication Servers appear in a table.
3. Select the AD server whose user groups you want to synchronize with
the user groups in CC-SG.
4. In the On Demand Synchronization list, select All User Groups, then
click the arrow button.
5. A list of all user groups found in the AD module whose names match
user groups in CC-SG appears. Select the user groups you want to
synchronize then click OK.
A confirmation message appears when all imported user groups in the
selected module have been successfully synchronized.
143