CommandCenter Secure Gateway - Admin Guide - Version ... - Raritan

Chapter 12: Remote Authentication
2. Type the port number on which the TACACS+ server is listening in the
Port Number field. The default port number is 49.
3. Type the authentication port in the Authentication Port field.
4. Type the shared key in the Shared Key and Shared key confirm fields.
Maximum length is 128 characters.
5. Click OK to save your changes. The new TACACS+ module appears
in the Security Manager screen under External AA Servers.
6. Select the Authentication checkbox if you want CC-SG to use the
TACACS+ module for authentication of users.
7. Click Update to save your changes.
About RADIUS and CC-SG
CC-SG users who are remotely authenticated by a RADIUS server must
be created on the RADIUS server and on CC-SG. The user name on the
RADIUS server and on CC-SG must be the same, although the passwords
may be different. See Users and User Groups (on page 109).
Add a RADIUS Module
To add a RADIUS module:
1. Choose Administration > Security.
2. Click the Authentication tab.
3. Click Add to open the Add Module window.
4. Click the Module Type drop-down menu and select RADIUS from the
list.
5. Type a name for the RADIUS server in the Module name field.
6. Click Next to proceed. The General tab opens.
RADIUS General Settings
1. Click the General tab.
2. Type the IP address or hostname of the RADIUS server in the IP
Address/Hostname field. See Terminology/Acronyms (on page 2)
for hostname rules.
3. Type the port number in the Port Number field. The default port
number is 1812.
4. Type the authentication port in the Authentication Port field.
5. Type the shared key in the Shared Key and Shared key confirm fields.
6. Click OK to save your changes.
149