CommandCenter Secure Gateway - Admin Guide - Version ... - Raritan

Chapter 16: Diagnostic Console
Option
Description
Full CC-SG Database Reset This option removes the existing CC-SG database and builds a new
version with the factory default values. Network settings, SNMP settings,
firmware, and diagnostic console settings are not part of the CC-SG
database.
IP-ACL settings are reset with a Full Database reset whether you select the
IP ACL Tables option or not.
The Neighborhood configuration is removed with the reset so CC-SG no
longer "remembers" being a Neighborhood member if it was.
Preserve CC-SG
Personality during Reset
Network Reset
SNMP Reset
Firmware Reset
Install Firmware into CC-SG
DB
This option is enabled when you select Full CC-SG Database Reset.
As the CC-SG database is rebuilt, some previously configured options are
saved.
• Secure Communication between PC Clients and CC-SG
• Enforce Strong Passwords
• Direct vs. Proxy Connections to Out-of-Band nodes
• Inactivity Timer setting
This option changes the network settings back to factory defaults.
• Host name: CommandCenter
• Domain name: localdomain
• Mode: Primary/Backup
• Configuration: Static
• IP Address: 192.168.0.192
• Netmask: 255.255.255.0
• Gateway: none
• Primary DNS: none
• Secondary DNS: none
• Adapter Speed: Auto
This option resets the SNMP settings back to factory defaults.
• Port: 161
• Read-only Community: public
• Read-write Community: private
• System Contact, Name, Location: none
• SNMP Trap Configuration
• SNMP Trap Destinations
This option resets all device firmware files to factory defaults. This option
does not change the CC-SG database.
This option loads the firmware files for the current CC-SG version into the
CC-SG database.
259