Download Jmp User Guide

92 Entering, Editing, and Managing Data Chapter 3
Selecting Rows and Columns
Figure 3.55 The Row Selection Menu
2 Select one of the following:
Select Excluded Selects all excluded rows regardless of their current selection status and
deselects any other previously selected rows.
Select Hidden Selects all hidden rows regardless of their current selection status and deselects
any other previously selected rows.
Select Labeled Selects all labeled rows regardless of their current selection status and deselects
any other previously selected rows.
Selecting Cells with Specific Values
If you are looking for a specific value in a data table, there are several ways to quickly select it, as
explained in the sections below.
Selecting Cells That Match the Currently Highlighted One
JMP can find all cells whose values are the same as the one(s) you currently have highlighted. You can
do this within one data table or throughout all open data tables. To select cells that contain the same
values as highlighted ones:
1 Highlight the cells that contain the value(s) you want to locate.
2 To find all matching cells within the active data table, select Rows > Row Selection > Select
Matching Cells. Or, right-click (hold the CONTROL key and click on Macintosh) one of the
highlighted row numbers and select Select Matching Cells.
To find all matching cells across all open data tables, select Select All Matching Cells.
3 The row(s) that contain the same values as the highlighted ones will highlight.
4 For example, suppose you wanted to select all cells in the age column that contain the highlighted
age 28 (on the left in Figure 3.56). You would select Rows > Row Selection > Select Matching