Download Jmp User Guide

210 Output Reports Chapter 6
Altering Plot and Chart Appearances
Adding Reference Lines
To add references lines to graphs:
1 Double-click a numeric axis. Or, right-click a numeric axis and select Axis Settings. The Axis
Specification window appears.
2 In the text box to the left of the Add Ref Line button, type the value to which you want the
reference line to correspond. This will be the position on the graph at which the line will be placed,
as shown in Figure 6.39.
3 Further customize the reference line by choosing either of these options:
Action
Give the line a color
Use a stippled line
Instructions
Click the color bar drop-down menu and select a color, as shown in
Figure 6.39.
Click the line drop-down menu and select one of the line types, as
shown in Figure 6.39.
4 Click the Add Ref Line button. The value will move into the box to the right of the Add Ref Line
button, indicating that it will be placed on the graph.
5 To add more lines, repeat the above steps.