Download Jmp User Guide

Chapter 11 SAS Integration 381
Connecting to SAS
Figure 11.4 Current Active Connection
3 Click Close.
To change the active connection
Note: The active connection is what is used to submit SAS code or handle SAS script commands.
To change the active connection, you first need to be connected to more than one server. Follow the
instructions in “To connect to a SAS Workspace Server,” p. 380 to add two or more server connections.
1 In the Open Workspace Server Connections section, click the drop-down menu and select the
desired server.
2 Click Set as Active.
3 Click Close.
11 Working with SAS
Tip: You can change the active server at any time.
To disconnect from a workspace server
1 In the SAS Server Connections window, select the workspace server to disconnect under Open
Workspace Server Connections.
2 Click Disconnect.
To disconnect from the metadata server
1 In the SAS Server Connections window, click Metadata Server Profiles.
2 Select the Metadata Server you’re connected to.
3 Click Disconnect.
To create or modify a metadata server profile
1 In the SAS Server Connections window, select the SAS Server Version.
2 Click Metadata Server Profiles.
3 Click Add to add a new profile, or click Modify to change a profile’s settings.
The Create Profile or Modify Profile window appears. If you are adding a new one, all fields are
empty except the Authentication domain field, which contains DefaultAuth. If you are modifying a
profile, the fields contain the current information.