Download Jmp User Guide

368 Personalizing JMP Chapter 10
Customizing Menus (Windows and Linux Only)
4 Click the appropriate button (Move Up, Move Down, and so on) to rearrange the buttons.
Example of Rearranging Menu Items
Suppose you are using Windows and want to simplify the Analyze menu, shown in Figure 10.30, by
eliminating Survival and Reliability and Modeling but keep Modeling’s Nonlinear command.
Figure 10.30 The Factory Default Analyze Menu
1 Select Edit > Customize > Menus and Toolbars. The Menus list appears on the left
(Figure 10.20).
2 Click the plus sign to open Main Menu.
3 Click the plus sign to open Analyze.
4 Click Survival and Reliability and select Delete.
5 Click Yes when asked if you’re sure you want to delete the menu.
6 Click the plus sign to open Modeling.
7 Click and drag Nonlinear and release the mouse button on top of the Multivariate Methods menu.
8 From the menu, select Move After “Multivariate Methods”.
9 Click Modeling and select Delete.
10 Click Yes when asked if you’re sure you want to delete the menu.
11 Click Apply at the top of the Menus list to apply the change.
Figure 10.31 The Rearranged Analyze Menu
12 When you close the Menus list, you are prompted to save your changes. Click Yes to save them, or
No to discard them.