To Know How - GROHE

Single-lever basin mixer 33 614 Single-lever bath mixer 19 506
Single-lever shower mixer 19 507
Maintenance instructions
Shut off hot and cold water supply!
Please perform disassembly in specified order. Assemble in reverse order.
Lever:
1. Lever out plug.
2. Unscrew and remove set screw using a 3mm allen
key.
3. Pull off lever.
Escutcheon (Fig. top right):
1. Unscrew and remove screws.
2. Remove escutcheon as illustrated.
3. Screw off cap.
Cartridge (Fig. left):
1. Pull off cap.
2. Unscrew screw coupling using a 32mm spanner.
3. Replace complete cartridge.
Observe the correct installation position!
Installation instruction: Ensure that the cartridge seals
engage in the grooves on the housing and the locating
pins at the base of the cartridge slot into the holes in the
housing.
Replace screw coupling and tighten.
Cartridge (Fig. down right):
1. Loosen screws and remove cartridge.
2. Replace complete cartridge.
Observe the correct installation position!
Installation instruction:
Ensure that the cartridge seals engage in the grooves on
the housing.
Replace screws and tighten evenly and alternately.
E 86
Diverter (Fig. left):
1. Lever out or screw off cap.
2. Screw off nut using a 7mm open-ended and remove
diverter knob.
3. Unscrew and remove headpart using a 13mm openended
spanner and remove spring.
4. Pull off locking washer from the diverter spindle.
5. Unscrew and remove outlet nipple using a 12mm allen
key.
Diverter (Fig. right):
1. Lever out cap.
2. Screw off nut.
3. Pull off diverter knob and cap.
4. Unscrew and remove diverter.