To Know How - GROHE

Self-closing pillar tap 36 100
Maintenance instructions
Shut off hot and cold water supply!
Please perform disassembly in specified order. Assemble in reverse order.
Self closing cartridge:
1. Unscrew self-closing cartridge using a 38mm
open-ended spanner.
2. Pull off strainer.
3. Check, clean and if necessary replace self-closing
cartridge and strainer.
4. Fit coloured ring, install O-ring and refit cap.
Flow time adjustment:
1. Close water supply.
2. Lock threaded ring and screw off cap.
3. Adjust running time using a screwdriver via internal
adjustment ring.
Turn clockwise = longer running time
Turn anti-clockwise = shorter running time
One turn of the adjustment ring corresponds to
approx. 4 s.
4. Refit cap.
S 12