To Know How - GROHE

Eurodisc SE, Controecon
Further service notes
Adjustment of temperature (36 244):
1. Initiate water flow and measure the temperature of the
water using a thermometer.
2. Turn temperature selection handle until the water
temperature reaches 30 °C.
3. Loosen screw and pull off cap.
4. Unscrew and remove screw and pull off scale handle.
5. Fit scale handle so that the 30 °C marking on the
handle aligns with the marking on the fitting housing
and fasten with a screw.
6. Fit cap and fasten using a screw.
Running time (36 233)
1. Activate adjusting mode by pressing the pushbutton
cap.
2. Keep pushbutton cap pressed; water flow commences
after pressing for 10 s.
3. Release the pushbutton cap after achieving the desired
running time (2 - 60 s).
4. Confirm the set time by pressing the pushbutton cap
twice (double-click) within 2 s.
The running time setting is confirmed by a short water
pulse (1 s).
Running time (36 100)
1. Close water supply.
2. Lock threaded ring and screw off cap.
3. Adjust running time using a screwdriver via internal
adjustment ring.
Turn clockwise = longer running time
Turn anti-clockwise = shorter running time
One turn of the adjustment ring corresponds to
approx. 4 s.
4. Refit cap.
S 18