To Know How - GROHE

Single-lever basin mixer 33 190 001, 33 183 001
Single-lever bidet mixer 33 244 001
Maintenance instructions
Shut off hot and cold water supply!
Please perform disassembly in specified order. Assemble in reverse order.
Single-lever bath mixer 33 390 001
Lever:
1. Lever out plug.
2. Unscrew and remove set screw using a 3mm allen
key.
3. Pull off lever.
Cartridge (Fig. left):
1. Pull off cap.
2. Unscrew screw coupling using a 32mm spanner.
3. Replace complete cartridge.
Observe the correct installation position!
Installation instruction: Ensure that the cartridge seals
engage in the grooves on the housing and the locating
pins at the base of the cartridge slot into the holes in the
housing.
Replace screw coupling and tighten.
Cartridge (Fig. right):
1. Pull off cap.
2. Loosen screws and remove complete cartridge.
3. Replace complete cartridge.
Observe the correct installation position!
Installation instruction: Ensure that the cartridge seals
engage in the grooves on the housing.
Replace screws and tighten evenly and alternately.
Diverter:
1. Lever out cap.
2. Screw off nut.
3. Pull off diverter knob and cap.
4. Unscrew and remove diverter.
E 66