To Know How - GROHE

Adjusting of temperature:
Automatic 2000: 34 692, 34 450
Euroeco Safety Mixer: 34 018
Open shut-off valve and measure temperature of the
water using a thermometer.
Turn temperature selection handle until the water temperature
reaches 30 °C.
- Loosen screw (X) and pull off cap.
- Unscrew and remove screw (Y) and pull off
temperature control handle.
- Fit temperature control handle so that the 30 °C
marking on the handle aligns with the marking on the
mixer body and replace screw.
- Fit cap and fasten using a screw.
Automatic 2000: 34 365
Open shut-off valve and measure temperature of the
water using a thermometer.
With safety stop depressed, turn temperature control
handle until water temperature reaches 38 °C.
- Pull off cap.
- Hold temperature control handle in this position and
unscrew and remove screw.
- Pull off temperature control handle and refit so that the
38 °C marking on the handle aligns with the marking
on the mixer body.
- Hold temperature control handle and replace screw.
- Refit cap.
Euroeco Safety Mixer: 34 018
Open shut-off valve and measure temperature of the
water using a thermometer.
Turn temperature selection handle until the water temperature
reaches 30 °C.
- Loosen screw (X) and pull off cap.
- Unscrew and remove screw (Y) and pull off
temperature control handle.
- Fit temperature control handle so that the 30 °C
marking on the handle aligns with the marking on the
mixer body and replace screw.
- Fit cap and fasten using a screw.
Grohtherm XL: 35 085
Open draw-off points and read off temperature of the
water on the thermometer. Turn temperature control
handle until the water temperature has reached 38 °C.
- Unscrew and remove screw, remove cap, unscrew
and remove screw and pull off temperature control
handle.
- Refit temperature control handle so that the 38 °C
marking (?) on the temperature control handle aligns
with the marking on the cover ring.
- Replace screw. Fit cap and replace screw.
T 40