May - The Monty Heat Treat News

panel is mounted on the end of the cooling chamber. Very good condition. Asking
$125,000 USD Each.
Item # C269 CI Hayes Mesh Belt Brazing/Sintering Furnace. Working dimensions of
4" over belt, 12' wide X 120' of heated length. Electrically heated 230/3/60, operating
temperature of 2100F. Model LAC. Temperature controls are new state of the art, control
panel with Honeywell sold state digital readout controller and overtemp for each of three
zones, includes volt and amp meters. Full alloy muffle 20' long, sealed, water jacked cooling
chamber with globar heating elements over and under the belt. (3) zones of control. (4)
argon flowmeters. Dayton AC inverter provides adjustable belt speed. Updated SCR
controls. Muffle and belt are new. Very good condition. Asking $55,000 USD.
Item # C268 Ipsen Pusher Furnace. This is a two tray unit with one tray in the loading
area and one in the high heat furnace, a push from the loading area pushes the base tray in
the high heat section into the quench. Tray size 30" x 45" and load height 18". Load
capacity of 1500 to 1800 pounds. Single ended recuperated burners. Controls will need to
be updated and radiant tubes will be required. Fair condition. Asking $7,500.00 USD.
www.themonty.com
Item #C267 Borel Mesh Belt Furnace Line. Model TCN-50 S/N 906132. Complete mesh
belt line designed to carbonitride, neutral harden and carburize fasteners. Manufactured in
the mid 1980's for a fastener company in Germany. Electrically heated, maximum operating
temperature 950C. Capable of handling 1,000 pounds/hour. Line is complete and includes