May - The Monty Heat Treat News
May - The Monty Heat Treat News
May - The Monty Heat Treat News
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Item # M316 Batch Washer. Three stage wash system able to handle baskets 24" wide X<br />
36" long X 24" high. First stage is an oscillating immersion wash with a secondary spray<br />
wash. Second stage is a spray rinse and third stage is a heated blow off. Entire system is<br />
constructed of 304SS. PLC controlled. <strong>The</strong> immersion wash features an oscillation process<br />
completely programmable with a time of 0-99 minutes. After the baskets are raised from<br />
the immersion tank a spray wash will turn on using separate nozzles from the rinse<br />
nozzles.. Again completely programmable from 0-99 minutes. During the rinse cycle a rinse<br />
drain is raised into position to ensure that rinse water and wash water are not mixed. After<br />
the wash system has finalized the liquid cleaning phases the dry off operation will begin.<br />
<strong>The</strong> wash and rinse systems will utilize #2 SS bag filters. Machine length from front to back<br />
is approximately 58" overall. Width 122" overall. Height approximately 96" minus the<br />
blowers and cylinders. Electrical supply service required is 200 Amp-480V-3 phase-60 Hz.<br />
Manufactured by Painter Design & Engineering in MI in late 2004. Original price $120,000<br />
USD. Excellent condition.<br />
Item #M315 Continuous Shot Blast System. This is a mesh belt shot blast line<br />
manufactured by MetFin (Metal Finish Supply Co. & Equipment). Model 6002 Manganese<br />
Mesh belt blast. S/N 5002. Voltage 460/3/60. Work area 36" wide X 18" clear over belt.<br />
Blast wheels-(6) 20 HP, 3600 RPM, TEFC. Elevator 3 HP, 1800 RPM, TEFC. Longitudinal<br />
Abrasive Screw Conveyor-2 HP, 1800 RPM, TEFC. Conveyor Drive 1 1/2 HP. Abrasive Blow<br />
off 10HP. Dust collector included. Controls complete. Very good condition. Asking<br />
$225,000 USD.<br />
Item #M314 Holcroft Dunk/Spray Washer. Model GPWS 24-36-24. Electrically heated,<br />
480/3/60/50 amps. Working dimensions of 24" wide X 24" high X 36" deep. External<br />
dimensions of 96"W X 143" high X 124" long (91" without skimmer attached). This is a<br />
standard dunk/spray washer with 4 Warren Electric immersion heaters. Spray nozzles are<br />
arranged over and all sides of the wash area. Load height is 51" from floor to top of rollers.<br />
Wheel centres are 14-1/2". Controls are mounted and wired on the right hand side of the<br />
washer and includes all necessary pushbuttons and signal lights. <strong>The</strong>re is a dunk cycle timer<br />
www.themonty.com
Change language