Item # VF219 Centorr Vacuum Furnace. Working dimensions of 7" diameter X 12" high. Max operating temperature of 2500C. This dual-chamber system is in excellent working condition and has a dual chamber for the loading and unloading. <strong>The</strong> system comes with an M and W Systems cooling unit used to watercool the chamber. <strong>The</strong> dual-chamber allows for quick loading and unloading while the other chamber is processing. Tungsten heating elements are used and allows for attaining extremely high temperatures, making high temperature heat treatment possible. <strong>The</strong> vacuum system consists of a roughing pump and a turbo pump that can be switched to pump either chamber. <strong>The</strong> vacuum unit pumps out all the oxygen and allows for heat treatment in an oxygen free environment for oxygen sensitive parts. <strong>The</strong> system is also equipped with a Honeywell controller that allows for automatic operation. Full furnace specs are available-please ask for more details. Asking Price: $65,000 USD Item #VF212 Abar 3000ºF, All-Metal HR-20x24 Vacuum Furnace. 1981 Abar Model HR-20x24, 1-Bar Vacuum Furnace, Ser# BM-721, 3000°F Rating (3050°F Short Term), Allmetal 6-Layer Moly Hot Zone in good condition, Work Zone: 18"W x 10"H x 24"D, (wider alternate work zone by raising hearth level), Moly Elements and Moly Hearth, 400 lb Load Rating at 2400°F, Honeywell DCP-551 upgraded temperature control (out of panel in photo), Fredericks cold cathode/TC combination vacuum instrument, Honeywell recorder(s), W-WRh control thermocouples, Single Owner since new, Design Uniformity: +/- 10°F, Diffusion pumped with refrigerated cryotrap, Varian/NRC Model HS-16 diffusion pump, Stokes Model 212MB mechanical pump and blower pump package, vane-style holding pump, No gas-cooling fan or heat exchanger (can be added at additional cost), 80 kVA VRT, heating power with SCR rectifier, NEMA-12 Control Panel, Abar LT-20 Loader, Utilities: 115 kVA total power, 220V/3ph/60Hz input power, Water requirement is 15 GPM at 60-90 PSI, 90°F min., 80-120 PSI Air, 25 SCF Nitrogen per cycle for backfill, OEM Parts & Service still fully supported by Ipsen (Rockford, IL) 800-727-7625, ext 253 Price: $59,000 USD Item #VF210 Ipsen Bottom Loading Vacuum Furnace. Built in 1988 by Ipsen this furnace has working dimensions of 72" diameter X 96" high. Moly hot zone in excellent condition. Operating temperature of 2400F. 5 bar quenching nitrogen/argon/hydrogen. 2 35" Varian diffusion pumps with 2 Stokes 412 roughing pumps with 615 blowers. 480volt, 1155 amps. Comes with a closed loop cooling system. Unit is currently in indoor heated storage and is complete. Vessel was ultrasonically tested before removal and the shell is in excellent condition as is the whole furnace. Will require 26' of height for installation. Please call for more details and pricing. www.themonty.com
Item #VF195 GM Vacuum Furnace. Working dimensions of 48” x 72” x 48”. Water cooled chamber and autoclave style locking front door. Hot zone has molybdenum heating elements with graphite liner and hearth. Power to the heating elements is through VRT’s. Hot zone is in good condition. Furnace does not have a vacuum pumping system or gas cooling but other than that is complete and ready to go. Full manuals and drawings are available. Operating temperature of 2400F. New in 1988. Asking $59,000 USD. www.themonty.com
- Page 1 and 2:
May Issue 2013 Table of Contents He
- Page 3 and 4:
Vacuum Oil Quench of Excellence Ips
- Page 5 and 6:
Heat Treat News Largest North Ameri
- Page 7 and 8:
• Abar Ipsen Endo Generator New L
- Page 9 and 10:
• Metallurgical Engineer Looking
- Page 11 and 12:
exchange rates). Organic revenue wa
- Page 13 and 14:
While the company was built on Gas
- Page 15 and 16:
years ago and has sold more than 10
- Page 17 and 18:
treatments, based on Plasma-chemica
- Page 19 and 20:
Maintenance Supervisor: This is the
- Page 21 and 22:
ecruiting firm in North America whe
- Page 23 and 24:
deployment to the Middle East. And,
- Page 25 and 26:
Seco Warwick Press Release. S/W in
- Page 27 and 28:
industry demands with innovative te
- Page 29 and 30:
installing a large capacity gas nit
- Page 31 and 32:
vacuum carburizing furnace, a 20 ba
- Page 33 and 34:
temperatures are achieved while its
- Page 35 and 36:
SECO/WARWICK Press Release. "Meadvi
- Page 37 and 38:
Mars. From one man’s inspiration
- Page 39 and 40:
commercial heat treating market. I
- Page 41 and 42:
"AFC-HOLCROFT ANNOUNCES CHANGES/ADD
- Page 43 and 44: Solar Atmospheres/Vacuum Carburizin
- Page 45 and 46: offices in Germany (SECO/WARWICK Se
- Page 47 and 48: Used Equipment At "themonty.com" yo
- Page 49 and 50: quench elevator. Met AMS 2750D requ
- Page 51 and 52: Item #B324 Ipsen TQ-2-EM Batch IQ L
- Page 53 and 54: Item # B315 Park Thermal Box Furnac
- Page 55 and 56: ehind each side air duct wall. Heat
- Page 57 and 58: Continuous See something you need,
- Page 59 and 60: operation. Comes with two spare bel
- Page 61 and 62: vibratory loading system, high heat
- Page 63 and 64: • Hercules 1,000 lbs Capacity Par
- Page 65 and 66: Item #C219 ABBOTT MODEL 6ZSCR-18-43
- Page 67 and 68: Draw/Temper See something you need,
- Page 69 and 70: Blue M batch oven, 4' x 4' x 2' alu
- Page 71 and 72: ight hand side of the oven includes
- Page 73 and 74: Item #T246 Aluminum Solution Treati
- Page 75 and 76: Generators See something you need,
- Page 77 and 78: Item #G169 Gasbarre/Sinterite Furna
- Page 79 and 80: Item #I152 Welduction RF Generator
- Page 81 and 82: Miscellaneous See something you nee
- Page 83 and 84: and spray cycle timer. A Honeywell
- Page 85 and 86: Salt See something you need, click
- Page 87 and 88: Vacuum See something you need, clic
- Page 89 and 90: Item # VF248 Lindberg Vacuum Furnac
- Page 91 and 92: Once we rebuild the pump that will
- Page 93: These pumps are rebuilt back to the
- Page 97 and 98: Joy Global Inc. offers excellent be
- Page 99 and 100: Item # O318 Moog, Torrance Operatio
- Page 101 and 102: Item#O314 Quality Manager Santa Fe
- Page 103 and 104: Item #O313 Successful and Growing M
- Page 105 and 106: • Minumum of 3 years of experienc
- Page 107 and 108: ¨ Must have the ability to report
- Page 109 and 110: • Minimum of 3 years department m
- Page 111 and 112: ***If interested, please discuss wi
- Page 113 and 114: • Ensures customers’ needs are
- Page 115 and 116: Seeking Employment See something yo