May - The Monty Heat Treat News

Item #C252 Surface Combustion Cast Link Belt Line. Working dimensions of 36" wide,
with 6" over belt and 25' of heating (hardening furnace). 3 zones of control, Recirculating
fans in zones 2 & 3. Gas fired, Eclipse recuperated burners. Automatic Walmil loading
system, rotary washer, quench and mesh belt temper. Mesh belt temper is electrically
heated, capable of 1500F and is 27' long, 12" of clearance over belt, Model E15TR54.
Nitrogen/Methanol, panel is included. Barber Colman digital controls. Overall in good
condition. Asking $195,000 USD.
Item #C250 Safed High Temperature Mesh Belt Furnace. Model 11 BD 30/21–
Atmosphere air hardening unit Built in 1992 for Camillus Cutlery. Used for hardening SS
blades and some annealing. Heating 460v 3ph 60 hz , fla 56 amps– 3 zones; approx. 6 ft
total; electric heat, belt width 10 ½ inches; 11’ muffled cooling zone. All muffles and belts
in good condition. Furnace is in excellent condition with spare parts including 18 ft section of
unused belt, over 30 new heating elements and other items. Total furnace length is 34 ft.
Max temperature aprox. 2100 F. Asking $15,000 USD.
Item #C246 BTU High Temperature Atmosphere Pusher Furnace. This 1997 high
temperature pusher furnace was designed for sintering moly-manganese at an operating
temperature of 1425C in a reducing atmosphere. Maximum operating temperature 1550C. 3
zones of control. Working dimensions of 8" wide with 12" clearance above the belt. Total
heated length 36", hearth height about the floor 42". Furnace atmosphere DA, Nitrogen and
Hydrogen. Cooling section consists of 18" insulated and a 36" water cooled section. Return
conveyor running parallel to the furnace is also included. Overall furnace length is 21' 6".
Electrically heated with Molybdenum ribbon style elements. Cooling section consists of a SS
muffle. System is complete and installed. Minor repairs to the controller are necessary.
Please call or E-mail for more details. Asking price $99,000 USD.
www.themonty.com