Pipelaying Tender-VOL IV - WorleyParsons.com

REWARI KANPUR PIPELINE
PROJECT
3 LAYER POLYETHYLENE COATING OF
LINEPIPES
DOCUMENT NUMBER
0068-00-SPC-2004
Revision 0
1.0 SCOPE
This Specification covers the minimum requirements for supply/arrangement of all
materials, plant, equipment, plant sites, consumables, utilities and application including all
labour, supervision, inspection and tests etc. for application of external anti-corrosion
coating of pipes by using Three Layer Side Extruded Polyethylene coating conforming to
DIN-30670, 1991,'Polyethylene Coating for Steel Pipes and Fittings' and the requirements
of this specification.
2.0 REFERENCE DOCUMENTS
2.1. CODES AND STANDARD
Reference has also been made to the latest edition (edition enforce at the time of issue of
enquiry unless otherwise specify) of the following Standards, Codes and Specifications.
The edition enforce at the time of floating the enquiry shall be termed as latest edition.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D-149
ASTM D-257
ASTM D-543
ASTM D-570
ASTM D-638
ASTM D-792
ASTM D-1238
ASTM D-1525
ASTM D-1603
ASTM D-1693
ASTM D-2240
STM D-3895
ASTM G-42
Standard Test Methods of Dielectric Breakdown Voltage and
Dielectric Strength of Solid Electrical Insulating Material at
commercial frequencies.
Standard Test Methods for D-C Resistance or Conductance of
Insulating Materials
Standard Method of Test for Resistance of Plastics to Chemical
Reagents
Standard Method of Test for Water Absorption of Plastics
Standard Method of Test for Tensile Properties of Plastics
Standard Test Method for Density and Specific Gravity (Relative
Density) of Plastics by Displacement
Test Method for Flow Rates of Thermoplastics by Extrusion
Test Method for Vicat Softening Temperature of Plastics
Test Method for Carbon Black in Olefin Plastics
Test Method for Environmental Stress Cracking of Ethylene
Plastics
Test Method for Rubber Property - Durometer Hardness
Test Method for Oxidative-Induction Time of Polyolefins by
Differential Scanning Calorimetry
Tentative Methods for Cathodic Disbonding of Pipeline coatings
Subjected to Elevated or Cyclic Temperatures
0068-FMT-01 Page 4 of 31
Copyright L&T-GULF Private Limited. All rights reserved.