11.11.2014 Views

Pipelaying Tender-VOL IV - WorleyParsons.com

Pipelaying Tender-VOL IV - WorleyParsons.com

Pipelaying Tender-VOL IV - WorleyParsons.com

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

EPMC SERVICES FOR REWARI – KANPUR PIPELINE<br />

SCOPE OF WORK–PIPELINE LAYING AND ASSOCIATED WORKS<br />

Part-2 (SV-07 to Kanpur) (CH: 227+706 km to 441+118 km -End approx.)<br />

5 DS-05- Kanpur<br />

Dehat<br />

Bared pipe<br />

HOLD 457mm OD, 6.4 W.T., API 5L X65 88334<br />

457mm OD, 6.4 W.T., API 5L X60 22600<br />

457mm OD, 8.7 W.T., API 5L X65 (LSAW) 1000<br />

* The pipe shall be supplied with 3LPE coated<br />

Notes:<br />

1. Line pipes of 457mm OD shall be SAWL, HFW and SAWH type.<br />

2. Contractor shall note that actual dumpsite locations indicated in the document may vary<br />

slightly from that indicated above. Contractor shall be responsible for performing all works as<br />

per scope of work at the finally selected dumpsite locations at no extra time/ cost to the<br />

Owner.<br />

3. Quantity of line pipe mentioned above includes the quantities required for other works that will<br />

form a part of pipeline Contractor to be installed within SVs station facility.<br />

4. Contractor to note that the quantities of line pipes indicated above includes surplus quantities<br />

over and above the actual requirement. Surplus pipes shall be returned to the Company as<br />

per the provisions indicated elsewhere in the contract.<br />

5. In addition to the above, following bare line pipes of size & thickness shall be used for<br />

fabrication of Hot Induction (HI) LR bends by the Contractor in addition to their usage in<br />

station piping. The contractor shall ensure the total quantity of line pipes required is adequate<br />

enough for fabrication of HI LR bends.<br />

Part LINE PIPE DETAILS FOR HI BEND LENGTH (m)<br />

Part -1 457 mm OD, 8.7 W.T., API 5L Gr.X-65, LSAW 297<br />

Part -2 457 mm OD, 8.7 W.T., API 5L Gr.X-65, LSAW 300<br />

5.1.2 Pipeline Materials (other than free issue line pipes)<br />

Owner shall supply following pipeline specialty long delivery items, in required quantities,<br />

as free issue material to the Contractor at appropriate time during execution of the work at<br />

the Owner designated storage yards:<br />

n:\513-mh-2145-rkpl\23 exchange\pipeline laying tender-rkpl\final 16.04.2013\pipeline-1\01 sow\mh2145-c000-pl-sow-0001.doc<br />

MH2145-C000-PL-SOW-0001 RevA Page 20 of 42

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!