Pipelaying Tender-VOL IV - WorleyParsons.com

EPMC SERVICES FOR REWARI – KANPUR PIPELINE
SPECIFICATION FOR PIPELINE HYDRO TESTING
3. QUALITY ASSURANCE/QUALITY CONTROL
The CONTRACTOR shall have in effect at all times, a QA/QC program, which clearly
establishes the authority and responsibility of those responsible for the quality system.
Persons performing quality functions shall have sufficient and well defined authority to enforce
quality requirements that initiate, identify, recommend and provide solutions to quality
problems and verify the effectiveness of the corrective action.
A copy of the Contractor's QA/QC program shall be submitted along with ISO 9000 prior to
start of activities.
The CONTRACTOR shall identify all applicable QA/QC requirements, and shall ensure
compliance thereto. On request, CONTRACTOR shall provide objective evidence of its QA/QC
surveillance activities.
The CONTRACTOR shall submit certified reports of production tests as soon as the tests are
completed satisfactorily.
OWNER reserves the right to inspect materials and workmanship at all stages of manufacture
and to witness any or all tests. The CONTRACTOR shall provide OWNER with a copy of its
Manufacturing and Inspection Plan for review and inclusion of any mandatory OWNER witness
points 30 days prior to pre-inspection meeting.
n:\513-mh-2145-rkpl\11 engineering\11.8 pipelines\06 spec\specification for pipeline hydrotesting\mh2145-c000-
pl-spc-0011.doc
MH2145-C000-PL-SPC-0011 RevA Page 11 of 71