Pipelaying Tender-VOL IV - WorleyParsons.com

REWARI KANPUR PIPELINE
PROJECT
3 LAYER POLYETHYLENE COATING OF
LINEPIPES
DOCUMENT NUMBER
0068-00-SPC-2004
Revision 0
ANNEXURE-I
LIST OF ACCEPTABLE COMBINATIONS OF COATING MATERIALS
The following combinations of coating materials are considered acceptable. In case any of
the combinations listed below are offered, details regarding properties of the offered
materials need not be furnished with bid. However, In the event of award of contract,
Contractor shall furnish the combination(s) proposed and re-confirmation of compatibility of
the proposed combination (s) from the raw materials Manufacturers.
Epoxy Powder
(Manufacturer)
Adhesive(Manufacturer)
PE
Compound(Manufacturer)
CORRO-COAT EP-F 2001
(JOTUN)
PE 50-8190/8191
(BASF)
CORRO-COAT EP-F 2001
(JOTUN)
PE 50-6109
(BASF)
CORRO-COAT EP-F 2001
(JOTUN)
SCOTCHKOTE 226N
(3M)
CORRO-COAT EP-F 2001
(JOTUN)
FUSABOND 158D
(DUPONT)
LUCALEN G3510H
(BASF)
ME 0420
(BOREALIS)
LE - 149 V
(S K CORPORATION)
SCLAIR 35 BP HDPE
(NOVACOR)
LUPOLEN 3652 D SW
00413
(BASF)
HE 3450
(BOREALIS)
ET 509 B
(S K CORPORATION)
Although the above combinations would be acceptable to Company, the responsibility of
suitability for application, performance and compliance to the coating system requirements
shall unconditionally lie with the Contractor
0068-FMT-01 Page 31 of 31
Copyright L&T-GULF Private Limited. All rights reserved.