Câ¢CURE® 800/8000 9.4 apC/8X Technical Manual - Tyco Security ...
Câ¢CURE® 800/8000 9.4 apC/8X Technical Manual - Tyco Security ...
Câ¢CURE® 800/8000 9.4 apC/8X Technical Manual - Tyco Security ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Testing the <strong>apC</strong>/<strong>8X</strong> Installation<br />
Diagnostic Test Program - Main Menu<br />
Figure C.5: Main Command Menu<br />
4. Select F3 from the Main Command menu to display the Diagnostic Test<br />
Program menu.<br />
The Diagnostic Test menu allows you to test Control points and Monitor<br />
points, and to use the Swipe Test to display card reads. The Swipe test is<br />
useful for determining what data is actually recorded on an access card.<br />
Table C.6: Function Keys for Diagnostic Test Menu<br />
Function Key<br />
F1<br />
F2<br />
F3<br />
F4<br />
Action<br />
View help about setting the Test<br />
Functions screen.<br />
Return to the Main Command screen.<br />
Test the <strong>apC</strong>'s LED bar.<br />
Test the <strong>apC</strong>'s control points, or put the<br />
control points into on/off cycle mode<br />
<strong>apC</strong>/<strong>8X</strong> Installation and Configuration Guide C-13
Change language