C•CURE® 800/8000 9.4 apC/8X Technical Manual - Tyco Security ...

Important Safety Information
Important Safety Information
Operating problems are often caused by failure to ground system components
properly. Be sure to follow all instructions for grounding described in this
manual.
Caution: Changes to the apC/8X not expressly approved by the
party responsible for compliance could void your authority to
operate the equipment.
The following precautions apply to all procedures described in this manual.
1. To meet the life safety requirements, a fail-safe mechanism override
must be installed at each card reader exit to allow people to leave the
secure area in case of electromechanical device failure.
2. The apC/8X device described in this manual could cause electrical
shock. Installation and maintenance should be performed only by
qualified personnel. Make sure power is removed before the system is
serviced.
3. The apC/8X and printed circuit boards in the reader devices are
susceptible to damage by static electricity. When handling these
devices:
• Make sure your work area is safeguarded.
• Transport all components in static-shielded containers.
xvi
apC/8X Installation and Configuration Guide