C•CURE® 800/8000 9.4 apC/8X Technical Manual - Tyco Security ...

Equipment Wiring Requirements
Equipment Wiring Requirements
Table 2.2: Equipment Wiring Specifications
Table 2.2 lists the wiring requirements for the apC/8X device and its
components. Consult the Belden specifications for information on
capacitance and resistance.
Signal From To Belden# Gauge # Prs Shielded
Max
Length
RS-232 Comm Host apC/8X 9855 22 2 Yes 50 ft.
RS-232 Comm
5-wire
Host apC/8X 8303 22 3 Yes 50 ft.
RS-485 Comm Host apC/8X 9842** 24 2 Yes 4000 ft.
Comm apC/8X RM Module 9841 ** 24 1 Yes 4000 ft.
Power apC/8X RM Module 8442/8461 22/18 1 No Varies
Appendix D
Control Output Strike 8461 18 1 No Varies with
strike draw
Appendix D
Supervised
Input (UL)*
Supervised/
Unsupervised
Input
Input Switch 9462 22 1 Yes 2000 ft.
Input Switch 8442/8461 22/18 1 No 2000 ft.
Request-to-exit Input Switch 8442/8461 22/18 1 No 2000 ft.
Door Contact Input Contact 8442/8461 22/18 1 No 2000 ft.
Relay Control
RM-4,
RM-4DS
ARM-1 9462 22 1 Yes 25 ft.
Reader RM Module Wiegand
Signaling
Read Head
9942
9260
Alpha wire
5386 C
22
20
18
3 Yes 200 ft.
300 ft.
500 ft.
Reader RM Module Magnetic
Signaling
Read Head
22 No 10 ft.
2-4 apC/8X Installation and Configuration Guide