HandNet Lite Manual - Security Technologies
HandNet Lite Manual - Security Technologies
HandNet Lite Manual - Security Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Configuration Tab<br />
Edit a Network<br />
1. Click the Configuration tab.<br />
2. Select the network you want to edit from the drop-down box.<br />
3. Click the Edit selected network button<br />
4. Complete the fields on the screen. See page 30 for TCP/IP network. See page 32 for<br />
Serial network.<br />
5. Click Accept settings.<br />
Delete a<br />
Network<br />
Only networks with no readers can be deleted.<br />
1. Click the Configuration tab.<br />
2. Select the network you want to delete from the drop-down box.<br />
3. Click the Edit selected network button<br />
4. Click the Delete this network check box.<br />
5. Click Accept settings.<br />
Connecting<br />
through a TCP/<br />
IP network<br />
To connect to a site through the network, you must have a TCP/IP network with static IP<br />
addresses. Your computer must have a network card and be connected to the network.<br />
If the network is faster than 10baseT, you must have a switching hub. To use TCP/IP,<br />
you must have either ordered readers with the Ethernet option enabled or purchased an<br />
Ethernet upgrade.<br />
Figure 10-2: Edit a TCP/IP Network<br />
Table 10-12: TCP/IP Network Fields<br />
Field Req’d Description<br />
Network Name Yes • Name of the network<br />
• Any combination of letters, numbers, spaces, and<br />
special characters, up to 30 characters long<br />
Description No Brief description of the network<br />
30
Change language