HandNet Lite Manual - Security Technologies

Smart Card Tab
Add an iCLASS
Definition
1. Click the Smart Card tab.
2. Click the Create new iCLASS button.
3. Complete the fields on the screen. See the iCLASS Definition Fields table on page 50
for more information.
4. Click the Accept settings button.
Edit an iCLASS
Definition
1. Click the Smart Card tab.
2. Choose the iCLASS definition you want to edit from the drop-down box.
3. Click the Edit selected iCLASS button.
4. Complete the fields on the screen. See the iCLASS Definition Fields table on page 50
for more information.
5. Click the Accept settings button.
Delete an
iCLASS
Definition
1. Click the Smart Card tab.
2. Choose the iCLASS definition you want to delete from the drop-down box.
3. Click the Edit selected iCLASS button.
4. Click the Delete this iCLASS definition check box.
5. Click the Accept settings button.
iCLASS
Definition
Fields
Table 11-19: iClass Definition Fields
Field Req’d Description
iCLASS definition
name
Biometric template
compression
Enter “new” iClass
key
Confirm “new”
iClass key
Yes
• Name of the iCLASS definition
• Any name that distinguishes this definition from others
• Controls the amount of compression of the finger
template before it is written to the iCLASS card
• Maximum compression should be used initially
• See the iCLASS Card Compression table on page 51
for more information
• A password that encrypts the areas used by the
readers on iCLASS cards
• Protects the fingerprint data from being read if the
same cards are used with other devices.
• 16 hex digits (0–9 and A–F.)
• A default key is used when a new iCLASS definition is
defined. Can be used permanently if desired.
• For increased security, change this key periodically.
Confirmation of previous field
50