HandNet Lite Manual - Security Technologies

More documents

Recommendations

Info

Access Tab The Access Tab is used to add or edit access profiles. Access profiles define which type of user can use each reader. For example, suppose your maintenance staff should have access to the maintenance rooms, your office staff should have access to the office, and your supervisors should have access to everything. You would create three access profiles: one for supervisors, one for office staff, and one for maintenance personnel. These profiles would identify which readers each group could use. After creating these profiles, whenever you added a user, you would identify which group the user was a part of, and the access profile for that group would automatically give the appropriate access. If you want all users to be able to use every reader, you don’t need to set up access profiles. <strong>HandNet</strong> <strong>Lite</strong> comes set up with an Always profile that lets users use any reader in the system. (It also has a Never profile that doesn’t let the user verify at any reader.) You can’t change or delete the Always or Never profile. Figure 12-1: Access Tab Add an Access Profile 1. Click the Access tab. 2. Click the Create access profile button. 3. Enter the access profile name. 4. Check the boxes next to the readers you want users with this access profile to be able to access. 5. Click the Accept settings button. Edit an Access Profile 1. Click the Access tab. 2. Select the name of the access profile you want to edit from the drop-down box. 3. Click the Edit access profile button. 4. Edit the access profile name, if necessary. 5. Check the boxes next to the readers you want users with this access profile to be able to access. 6. Click the Accept settings button. 61
Access Tab Delete an Access Profile 1. Click the Access tab. 2. Select the name of the access profile you want to delete from the drop-down box. 3. Check the box next to Delete this access profile. 4. Click the Accept settings button. Figure 12-2: Access Profile Edit Screen Table 12-26: Access Profile Fields Field Req’d Description Access profile name Check readers to be included in this access profile Delete this access profile Yes No No • Name of the access profile • Use a name that describes the group of users for which this access profile will be used. • Any combination of letters, numbers, spaces, and special characters up to 30 characters • Lists all the readers in the system • Check the box next to each reader you want users with this profile to be able to access. • Uncheck the box next to each reader you do not want users with this access profile to be able to access. • Check to delete this access profile and remove it from the access profile list. • Access profiles that are assigned to users cannot be deleted. To remove an access profile from a user, see Edit a User on page 12. • If you delete the profile that is the default profile for reader enrollments, the next profile in the list will be selected. To choose a different default profile, go to the Settings window and choose the correct profile; see Settings Fields on page 25 for more information.. 62
Page 1 and 2:
HandNet-Lite Terminal User’s Guid
Page 3 and 4:
Contents Getting Started...........
Page 5 and 6:
HandNet Lite Manual Access Tab.....
Page 7 and 8:
Getting Started Logging into HandNe
Page 9 and 10:
Getting Started Main HandNet Lite W
Page 11 and 12:
Getting Started 6
Page 13 and 14:
8
Page 15 and 16: Users Tab Enroll Users Users must b
Page 17 and 18: Users Tab Edit a User 1. Click the
Page 19 and 20: Users Tab Field Req’d Description
Page 21 and 22: Users Tab 16
Page 23 and 24: 18
Page 25 and 26: Reports Tab Users Report The Users
Page 27 and 28: 22
Page 29 and 30: 24
Page 31 and 32: Settings Tab Managing Operators Ope
Page 33 and 34: 28
Page 35 and 36: Configuration Tab Edit a Network 1.
Page 37 and 38: Configuration Tab Connecting throug
Page 39 and 40: Configuration Tab Edit a Reader 1.
Page 41 and 42: Configuration Tab Field Req’d Des
Page 45 and 46: Configuration Tab Security Settings
Page 49 and 50: Configuration Tab Enabling a Second
Page 51 and 52: Configuration Tab Card Format Scree
Page 53 and 54: Configuration Tab Set Up the Parity
Page 55 and 56: Smart Card Tab Add an iCLASS Defini
Page 57 and 58: Smart Card Tab iCLASS Card Protecti
Page 59 and 60: Smart Card Tab Specify (protect) ap
Page 61 and 62: Smart Card Tab DESFire Definition F
Page 63 and 64: Smart Card Tab Mifare Standard Defi
Page 65: Smart Card Tab Field Req’d Descri
Page 69 and 70: Database Tab Disconnect the Databas
Page 71 and 72: Appendix A Type Format Description
Page 73 and 74: 68
Page 75 and 76: Index F Facility Code 36 Fields Acc
Page 77 and 78: Index 72
show all

HandNet Lite Manual - Security Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?